3Com 4500 PWR 26-Port Configuration Manual page 221

Configuring a MAC Address Entry
Setting the MAC Address Aging Timer
Setting the Maximum Number of MAC Addresses a Port Can Learn
Enabling Destination MAC Address Triggered Update
Con figuring a MAC Address Entry
You can add, modify, or remove a MAC address entry, remove all MAC address entries
specific port, or remove specific type of MAC address entries (dyn
Adding a MAC address entry in system
Y ou can add a MAC
Follo w these steps to add
To do...
Enter system view
Add a MAC a ddress
entry
When you add a MAC address entry, the port specified by the interface argument must belong to
the VLAN specified by the vlan argument in the command. Otherwise, the entry will not be added.
If the VLAN specified by the
added, it will become a static VLAN.
Adding a MAC address entry in E
Follo w these steps to add
To do...
Enter system view
Enter Ethernet port view
Add a MAC address entry
Task
view
address entry in either system view or Ethernet port view.
a MAC address entry in system view:
Use the command...
system-view
mac-address { static | dynamic | blackhole }
mac-address interface interface-type
interface-number vlan vlan-id
vlan argument is a dynamic VLAN, after a static MAC address is
thernet port v
a MAC a ddress entry in Ethernet p
Use the command...
system-view
interface interface-type
interface-number
mac-address { static |
dynamic | blackhole }
mac-address vlan vlan-id
amic or static MAC address entries).
iew
ort view
18-5
Remarks
Required
Optional
Optional
Optional
concerning a
Remar
—
Required
:
Remarks
—
—
Required
ks