3Com 4500 PWR 26-Port Configuration Manual page 744

Information filtering by severity works this way: information with the severity value greater than the
configured threshold is not output during the filtering.
If the threshold is set to 1, only information with the severity being emergencies will be output;
If the threshold is set to 8, information of all severities will be output.
Ten channels and six ou
The system supports six information output destinations, including the Console, Monitor terminal
(monitor), logbuffer, loghost, trapbuffer and SNMP.
The system supports ten channels. The channels 0 through
associated with six output destinations by default. Both the channel names and the associations
be tween the channels and
Table 59-2 Information chann
Information channel
number
0
1
2
3
4
5
6
7
8
9
Configurations for the six output destinations function independently and take effect only after the
information center is enabled.
tput destinations of system information
out put destinations ca n be change
els and output destina
Default channel
name
console
monitor
loghost
trapbuffer
logbuffer
snmpagent
channel6
channel7
channel8
channel9
59-2
5 have their default channel names and are
d through commands.
tions
Default output destination
Console (Receives log, trap and debugging
information.)
Monitor terminal (Receives log, trap and
debugging information, facilitating remote
maintenance.)
Log host (Receives log, trap and debugging
information and information will be stored in files
for future retrieval.)
Trap buffer (Receives trap information, a buffer
inside the device for recording information.)
Log buffer (Receives log information, a buffer
inside the device for recording information.)
SNMP NMS (Receives trap information.)
Not specified (Receives lo
information.)
Not specified (Receives lo
information.)
Not specified (Receives lo
information.)
Not specified (Receives log, trap, and debugging
information.)
g, trap, and debugging
g, trap, and debugging
g, trap, and debugging