3Com 4500 PWR 26-Port Configuration Manual page 753

When there are multiple Telnet users or dumb terminal users, they share some configuration
parameters including module filter, language and severity level threshold. In this
any such pa
To view de bugging in
when setting the system i
modules through the debugging comm
En abling system information dis
After setting to output system information to a monitor terminal, you need to enable the associated
d isplay function in order to display
Follow these steps to enable the display of system information on a monitor terminal:
To do...
Enable the debugging/log/trap
n
informatio terminal display function
Enable debugging information
terminal display function
Enable log information terminal
display function
Enable trap information terminal
display function
Make sure that the debugging/log/trap information termi
t erminal monitor comma
the terminal debugging, terminal logging, or terminal trapping
Settin g to Output Sy
Follow these steps to set to output system information to a l
To do...
Enter system view
Enable the information
center
rameter m ade by one use
formation of spe
nforma tion output rules, a
play
the o utput information on
terminal monitor
terminal debugging
terminal logging
terminal trapping
nd ) before you enable
stem Information to a Log Host
Use the command...
system-view
info-center enable
r will also be reflected on all
cific modules, you need
nd enab
and.
on a monitor term inal
the mon
Use the command...
nal displa
the corres ponding terminal disp
og host:
—
Optional
Enabled by default.
59-11
case, change to
other use r terminals.
to set the info rmation typ
le debugg ing for corresponding
itor termin al.
Remarks
Optional
Enabled by default
Optional
Disabled by default
Optional
Enabled by default
Optional
Enabled by default
y function is enabled (use the
lay function by using
comm and.
Remarks
e as debug