Position Request - Standard Horizon CPF390i Owner's Manual

Distress calls to review at a later date.
1. Press [MENU] and move the ShuttlePoint knob to highlight USER POINTS and press
[ENT].
2. Move the ShuttlePoint knob to highlight DSC Log and press [ENT].

12.9.2 Position Request

STANDARD HORIZON GPS Chart Plotters are able to display the location of a vessel when
connected DSC VHF radio and when a Position Request or Report call is received.
STANDARD HORIZON GPS Chart Plotter also log DSC Distress calls to review at a later
date.
1. Press [MENU] and move the ShuttlePoint knob to highlight USER POINTS and press
[ENT].
2. Move the ShuttlePoint knob to highlight DSC Log and press [ENT].
3. Move the ShuttlePoint knob to the right to select POSITION REQUEST and press [ENT].
CP390i and CPF390i
Figure 12.9.1 - DSC Log - Distress Call
Figure 12.9.2 - DSC Log - Position Request
Page 97