Table of Contents
Advertisement
Land Elevations
Land Elevation Values : Turns the Land Elevation Values On or Off.
Roads
Points Of Interest
12.0.10
Chart Settings
Settings that control how the chart features will be shown on the Chart page of the GPS
Chart Plotter.
Lat/Lon Grid
: Turns the Latitude and Longitude grid lines On or Off on the Chart page. See the figure below:
Chart Boundaries : Turns the Chart Boundaries On, Off or Auto. The Chart Boundaries are the "ticked" boxes
sourround the coastline. Each box indicates an area where more details is available. The Chart
Boundaries are only show when a C-MAP B
Chart Plotter. See the pictures below:
Value Added Data : Turns the Value Added Data On or Off. The Value Added Data (VAD) is a collection of additional
cartographic objects which are not present on the original paper chart (from which the electronic
chart derives). These objects have been obtained from other sources and then merged to the
electronic charts in order to provide more information useful for the navigation. VAD object can
be any cartographic objects and it can be distinguished from the official-chart-objects from the
Quick Info. A dedicated icon is shown on the Quick Info window to indicate that the object queried
is a VAD. The same icon is also shown on the Full Info page and in addition the extended text Value
Added Data is shown on the details of the VAD object. See the figure below:
Page 88
: Turns the Land Elevations On or Off.
: Turns the Roads On or Off.
: Turns the Points of Information On or Off.
Figure 12.0.9 - Example of Roads and Points Of Interest
+
J
NT
/MAX C-CARD is inserted into the GPS
Y
EPPESEN
CP390i and CPF390i
Advertisement
Table of Contents
