Table of Contents
Advertisement
3. Move the ShuttlePoint knob to select the desired display and press [ENT]. The Page
options are shown in the following paragraphs.
17.2.0 Auto Full page
When this page is selected, the Fish Finder automatically changes the transmit frequency
to show depths. Automatic switching occurs when depth of water is less than 400Ft
(200kHz) and greater than 400Ft (50kHz).
17.2.1 200kHz Full, 50kHz Full and 50&200kHz Display pages
Allows the user to setup the GPS Chart Plotter display to show 200kHz, 50kHz or
50 & 200 kHz split screen Fish Finder.
When the 50 & 200 kHz page has been selected the active window has a yellow border.
Please follow the procedure below to change the focus:
1. Move the ShuttlePoint knob to the right or left: the focus is changed and the focused
window has a yellow border.
17.2.2 200kHz and 50kHz Zoom pages
Allows the user to zoom into the 200kHz or 50kHz Fish Finder display to show detail of the
area selected by the VRM (Variable Range Marker). Refering to Figure 17.2.2, the left
display shows the zoomed display and the right display shown the unzoomed display.
CP390i and CPF390i
Figure 17.2a - Fish Finder page selection menu
Figure 17.2.1 - Full Display pages
Page 119
Advertisement
Table of Contents
