Wrecks - Standard Horizon CPF390i Owner's Manual

7. Press [CLR] again at any time to return your cursor to your vessel's position.
Figure 4.0.2 - Tide Stations
Figure 4.0.2a - Tide Graph page
Refer to the image above. The time displayed corresponds to the location of the
cross-hair cursor in the Tide Graph . Moving the ShuttlePoint knob to the left or right
changes the time, and moving the ShuttlePoint knob up or down selects the Tide height and
Tide draught on the Tide Graph.
NOTE
The Local Offset matchs the Time Offset entered in the Time Setup Menu (see Par. 3.2)
4.0.3

Wrecks

This feature is used to locate the 20 nearest Wrecks to the position of your vessel. A
Wreck is represented with an icon on the chart. See the following table:
Figure 4.0.3 - Wreck icons Table
1. Press [FIND].
2. Move the ShuttlePoint knob to highlight WRECKS and press [ENT] or move the
ShuttlePoint knob to the right.
3. A popup window will be shown with a list of nearest Wrecks.
4. Move the ShuttlePoint knob to highlight the desired Wreck and press [ENT].
5. Another window will be shown detailing the Wreck information.
6. Press [CLR] to show the actual position of the Wreck on the Chart page.
Page 42 CP390i and CPF390i