Nmea 0183 Interfacing; Distress Call; Position Request - Standard Horizon CPN1010i Owner's Manual

NMEA 0183 Interfacing

To take advantage of these functions the CPN Series Chart Plotter must be interfaced
(wired) to a STANDARD HORIZON or compatible DSC VHF. Refer to Connections section
for connection example.

Distress Call

CPN Series Chart Plotters are able to display the location of a vessel in distress when
interfaced to a compatible DSC VHF with NMEA 0183 output and the radio receives a DSC
Distress Call. CPN Series Chart Plotter also log DSC Distress calls to review at a later date.
To select the Distress Call page follow the procedure:
1. Press the
2. Turn the Rotary Knob until DSC LOG is highlighted and tap on it.
This page allows to:
· tap on
· tap on
· tap on
· tap on /
· tap on

Position Request

CPN Series Chart Plotters are able to display the location of a vessel when connected DSC
VHF radio and when a Position Request or Report call is received. CPN Series Chart Plotter
also log DSC Distress calls to review at a later date.
To select the Position Request page follow the procedure:
1. Press the
2. Turn the Rotary Knob until DSC LOG is highlighted and tap on it.
3. Tap on
CPN700i and CPN1010i Multimedia Chart Plotters
key, tap on User Points.
: centers the map on the selected DSC position
: deletes the selected DSC position
: deletes all entries
: allows hiding/showing the selected DSC position on the chart
: allows selecting the Position Request page.
key, tap on User Points.
.
Page 99