Table of Contents
Advertisement
It is possible to change the focus by pressing and holding [FIND] for 2 seconds (in place of 1 and
2 steps in the above procedure).
With the focus on the Chart page the cursor may be moved and all chart menus can be
selected. When focus is on the Fish Finder window the Variable Range Marker can be
moved to see the depths of targets and Fish Finder menus can be accessed.
17.2.4 Radar pages
17.2.4.0
Fish/Radar/Chart page
Selects the GPS Chart Plotter display to show the Chart, the Fish Finder and the Radar page
on the screen.
17.2.4.1
Radar Combo page
Selects the GPS Chart Plotter display to show the Chart, the Fish Finder, the Radar and the
Higway page on the screen.
17.2.4.2
F
OCUS
When the Fish/Radar/Chart page or the Combo page has been selected, the active window
is highlighted a "red" border around the window. The keyboard commands are related to that
focused view. To move the focus to a different window follow the procedure:
1. Press any Soft Key. The Soft Key labels appear on the bottom of the screen. A [F
Soft Key will be shown.
2. Press [F
] to show the Focus popup window, where the active focus window label
OCUS
is highlighted.
CP390i and CPF390i
Figure 17.2.4.0 - Fish/Radar/Chart page
Figure 17.2.4.1 - Radar Combo Page
Soft Key
NOTE
]
OCUS
Page 121
Advertisement
Table of Contents
