Table of Contents
Advertisement
To select the area to be zoomed in move the ShuttlePoint knob up or down which moves
the VRM line. To zoom In or Out, press [ZOOM IN] or [ZOOM OUT]. The zoom ranges are
2x and 4x the normal Fish Finder display.
17.2.3 200kHz and 50kHz Fish/Chart pages
Selects the GPS Chart Plotter display to show the Chart page on the left half of the screen
and the Fish Finder on the right half of the screen. 200kHz or 50kHz Fish Finder can be
selected on the right half of the display.
When the Fish/Chart page has been selected please follow the procedure below to place
the focus on the Chart or Fish Finder window:
1. Press one of the Soft Keys under the display. The Soft Key labels appear on the bottom
of the screen. A [F
2. Press [F
] to show the Focus popup window, where the active focus window label
OCUS
is highlighted.
3. Select CHART or FISH FINDER using the ShuttlePoint knob and press [ENT].
Figure 17.2.3a - Example of Fish/Chart page with [F
Page 120
Figure 17.2.2 - Zoom Full page
Figure 17.2.3 - Fish/Chart page
] Soft Key will be shown.
OCUS
and with Focus popup window (on the right side)
] shown (on the left side)
OCUS
CP390i and CPF390i
Advertisement
Table of Contents
