Focus Soft Key On Dual Chart Page - Standard Horizon CPF390i Owner's Manual

12.0.0 F Soft Key on Dual Chart page
OCUS
When Dual Chart is selected, you will notice one of the chart windows will have a red border
around it. This red border indicates which chart window the GPS Chart Plotter has the focus
on, meaning if the ShuttlePoint knob is moved the cursor on chart window will move.
The focus may be changed to the other chart window with the procedure below:
1. Press any Soft Key. The Soft Key labels appear on the bottom of the screen. A [F
Soft Key will be shown.
2. Press [Focus]. A popup window appears where the active focus window label is
highlighted.
3. Move the ShuttlePoint knob up and down to highlight the desired item and press [ENT].
The red border is moved to the focused window.
It is possible to change the focus by pressing and holding [FIND] for 2 seconds (in place of 1 and
2 steps in the above procedure).
Page 82
Figure 12.0.0 - Example of Dual Chart page with [F
Figure 12.0.0a - Example of Dual Chart page with focus window shown
OCUS
NOTE
] shown
CP390i and CPF390i
]
OCUS