Table of Contents
Advertisement
17.12.0
Color Settings
Allows you to change the color of the Fish Finder display from Blue (default), White, Black,
Gray scale.
17.12.1
Scrolling Speed
Controls the rate the Fish Finder scrolls and updates the Fish Finder display.
17.12.2
White Line
Controls how the bottom type (hard or soft) is shown on the display. When the White Line
is Off the bottom return will display as red. When the White Line is On it can be used to
determine bottom hardness.
The White Line option is not available in the 50 & 200kHz page.
17.12.3
Fish Symbols
Controls the graphical representation of underwater-suspended targets.
Echo
Icon + Echo
Icon + Echo + Depth : shown as arches with the Fish icon and relative depth values
Echo + Depth
Icon
Icon + Depth
17.12.4
A-Scope
Shows the real time display of the echo from the bottom.
17.12.5
Water Temperature
Allows selection between:
a. the temperature sensor in the depth transducer
or
b. an external temperature sensor connected to the Optional Connection wires.
CP390i and CPF390i
Figure 17.12.0 - White and Blue background examples
: shown as arches (echoes)
: shown as arches with the Fish icon
: shown depth values
: shown as Fish icons without the arches
: shown as Fish icons and their relative depth values (shown accord-
ingly to currently selected depth unit)
NOTE
Page 129
Advertisement
Table of Contents
