Table of Contents
Advertisement
It is possible to change the focus by pressing and holding [FIND] for 2 seconds (in place of 1 and
2 steps in the previous procedure).
3. Move the ShuttlePoint knob to highlight the desired window and press [ENT]. The red
border is moved to the focused window.
When the focused window (identified by the red border) is the Fish Finder page and the selected
Fish Finder page is the 50 & 200 kHz, it is possible to change the active FF sub-window (identified
by the yellow border). To change the focus between the 50kHz and 200kHz sub-window please
move the ShuttlePoint knob to the right or left, the focus is changed and the focused window has
a yellow border (see also Par. 17.2.1).
17.3
SOFT KEY OPERATION
1. Press any of the Soft Keys to show the key descriptions, then press the [200
Key if it has been customized (for details see the Par. 3.7).
17.4
SETUP MENU
This section explains how to show the Fish Finder Setup Menu and describe the Fish Finder
Setup Menu sub-options.
1. From the Full Fish Finder page, press [MENU]. The following menu appears:
Page 122
Figure 17.2.4.2 - Example of Combo page with [F
Figure 17.3 - Example of Fish Finder page selection by Soft Keys
NOTE
OCUS
NOTE
] shown
CP390i and CPF390i
H
] Soft
K
Z
Advertisement
Table of Contents
