About Page - Standard Horizon CP500 Owner's Manual

CURSOR POSITION
COG TIME LINE
COMPASS ROSE
3.9

ABOUT PAGE

From Main Menu page it is possible to select the About page containing software, chart and
optional devices information.
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press
[ENT].
2. Move the ShuttlePoint knob to highlight About... and press [ENT] or move the
ShuttlePoint knob to the right.
3. The Information page appears on the screen (see the previous Figure).
4. Press [CLR] or move the ShuttlePoint knob to the left to exit and show the Chart page.
Page 32
turned On (default) or Off. The Cursor Window is automatically disabled when General
is set in Windows Setup option.
The position of the cursor can be customized so it is centered in the middle (if Center
selected) or centered on the bottom of the Chart page (if Bottom selected, default).
It is a line projected from the ship icon which indicates the distance your vessel will travel
at the current speed. Selections are 2, 10 (default), 30 minutes, 1, 2 hours and infinite.
Allows selection of compass direction indication around Ship Icon. The default is On.
Figure 3.9 - Example of About page
CP500