Port Power; Port Excessive - Planet WGSW-24040 User Manual

Port Power

Description:
Set or show the port PHY power mode.
Syntax:
Port Power [<port_list>] [enable|disable|actiphy|dynamic]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable all power control
disable: Disable all power control
actiphy: Enable ActiPHY power control
dynamic: Enable Dynamic power control
Default Setting:
Enable
Example:
Disable port power function for port1-4
SWITCH/>port power 1-4 disable

Port Excessive

Description:
Set or show the port excessive collision mode.
Syntax:
Port Excessive [<port_list>] [discard|restart]
Parameters:
<port_list>: Port list or 'all', default: All ports
discard : Discard frame after 16 collisions
restart : Restart backoff algorithm after 16 collisions
(default: Show mode)
Default Setting:
Discard
User's Manual of WGSW-24040 / WGSW-24040R
236
SGSW-24040 / SGSW-24040R