Re-Enable Zone (B5) - Panasonic EBL128 User Manual

Panasonic Eco Solutions Nordic AB
MEW01624 Rev: -
5.5

Re-enable zone (B5)

Not available for users with access level / type "Information only".
Disabled zones are listed in menu H4/U1.
Re-enabling via menu B5 has higher priority than automatic re-
enabling.
NOTE! Alarm points that have been individually disabled via menu
H2/B2 cannot be collectively re-enabled via menu B5. They have to
be individually re-enabled via menu H2/B6.
If there is nothing to re-enable, --- List is empty --- will be
shown.

Log in with a User name and Password for typ Building officer (or
Service personnel), see page 5.
H1 Perform monthly test
Scroll (or press "2") to menu H2.
H2 Disable or re-enable

Press "A" to sub menu B1.
B1 Disable zone

Scroll (or press "5") to menu B5.
B5 Re-enable zone

Press "A". L=This is a list in which you can scroll. Select a zone.

To re-enable the selected zone press "A".

When required, re-enable more zones or press "Return" (P9) to
menu B5.

Scroll to another menu or press "Return" to menu H2. Scroll to
another menu or leave the menu system by pressing "Return".
EBL128 version 2.0.x, Daily user's manual
14