Re-Enable Zone-Address (B6) - Panasonic EBL128 User Manual

Panasonic Eco Solutions Nordic AB
MEW01624 Rev: -
5.6

Re-enable zone-address (B6)

Not available for users with access level / type "Information only".
Disabled alarm points (zone – address) are listed in menu H4/U1.
Re-enabling via this menu has higher priority than automatic re-
enabling.
Alarm points / zones disabled via the "Encapsulation function" have to
be re-enabled via this menu (B6) before they can activate a new alarm.
In this case a zone will be presented as ZZ - 00 (ZZ=01-99).
If there is nothing to re-enable, --- List is empty --- will be
shown.

Log in with a User name and Password for typ Building officer (or
Service personnel), see page 5.
H1 Perform monthly test
Scroll (or press "2") to menu H2.
H2 Disable or re-enable

Press "A" to sub menu B1.
B1 Disable zone

Scroll (or press "6") to menu B6.
B6 Re-enable zone-address

Press "A". L=This is a list in which you can scroll. Select an alarm
point (zone-address).

To re-enable the selected alarm point press "A".

When required, re-enable more alarm points or press "Return" (P9)
to menu B6.

Scroll to another menu or press "Return" to menu H2. Scroll to
another menu or leave the menu system by pressing "Return".
EBL128 version 2.0.x, Daily user's manual
15