Version And Alarm Counter (U7) - Panasonic EBL128 User Manual

Panasonic Eco Solutions Nordic AB
MEW01624 Rev: -
7.7

Version and alarm counter (U7)

Version: The EBL128 software / firmware version.
Alarm counter The alarm counter is increased with "1" every time
the c.i.e. enters the real "fire alarm condition" (Fire alarm indication in
the display, LEDs "Fire" lit and the c.i.e. buzzer sounding), i.e. not for
zones in test mode. It starts on 000 and goes to 999. It can be reset to
000 via EBLWin (Control unit menu "Reset alarm counter..."). It is
stored in an EEPROM, i.e. the value will be retained also after the
c.i.e. has been powerless.

Log in with a User name and Password for typ Building officer (or
Service personnel), see page 5.
H1 Perform monthly test
Scroll (or press "4") to menu H4.
H4 Present system status

Press "A" to sub menu U1.
U1 Disablement

Scroll (or press "7") to menu U7.
U7 Version and alarm counter

Press "A". Version and Alarm counter is shown.

Press "Return" (P9) to menu U7.

Scroll to another menu or press "Return" to menu H4. Scroll to
another menu or leave the menu system by pressing "Return".
EBL128 version 2.0.x, Daily user's manual
28