Activate Interlocking Output (C2) - Panasonic EBL128 User Manual

Panasonic Eco Solutions Nordic AB
MEW01624 Rev: -
10.2

Activate interlocking output (C2)

Not available for users with access level / type "Information only".
The output in each interlocking combination (Area - Point) can be
manually activated via this menu (C2).
interlocking input will be "monitored" in the same way as if the output
was activated by its control expression. Reset of the output activated
via menu C2 has to be performed via menu C3.

Log in with a User name and Password for typ Building officer (or
Service personnel), see page 5.
H1 Perform monthly test
Scroll (or press "9") to menu H9.
H9 Interlocking outputs and inputs

Press "A" to sub menu C1.
C1 Activated interlocking outputs / inputs

Scroll (or press "2") to menu C2.
C2 Activate interlocking output

Press "A". Use the keypad to specify Area – Point (AA and PP) for
the interlocking output to be activated.

Press "A". Interlocking output AA-PP activated.

Press "A". If more interlocking outputs shall be activated do as
above, if not press "Return" to menu C2.

Scroll to another menu or press "Return" to menu H9. Scroll to
another menu or leave the menu system by pressing "Return".
EBL128 version 2.0.x, Daily user's manual
32
The corresponding