Panasonic FP-7818 Service Manual & Parts Manual page 88

2) Output check*
Activate the door switch before executing output check.
Press the Print key to start and press the Clear/Stop key to reset.
Code Item
26 Timing roller clutch
27 Sheet bypass paper feed solenoid
28 Sheet bypass paper feed clutch
29 Main motor
30 Registration roller clutch
31 Main fuser lamp
32 Sub fuser lamp
33 Exposure lamp
34 Ozone/suction fan, developer unit cooling
fan (Except FP-7818) and dust collecting
fan
35 Recycling solenoid
(Except FP-7818)
36 Paper exit selection solenoid
(Except FP-7818/7824)
37 Exhaust fan motor 1
38 Exhaust fan motor 2
39 Optics fan motor 1 and 4
40 Optics fan motor 2 (Except FP-7818)
Exhaust fan motor 3 (Except FP-7818)
Lift motor (FP-7818)
41 Drum separator solenoid (FP-7845/7850)
Paper feed solenoid (FP-7818)
42 Total counter
* Accessory checks require the selected accessory to be ready (Cover closed, etc.)
Function
When CN8-12 is +24V, clutch operates.
When CN5-6 is +24V, solenoid operates.
When CN5-2 is +24V, clutch operates.
When CN12-5 is +24V, motor rotates.
(HVPS, developer unit, discharge lamp and
eraser lamp turn ON.)
When CN5-4 is +24V, clutch operates.
When CN203-4 is AC line level, lamp lights up.
When CN203-6 is AC line level, lamp lights up.
When CN202-2 is AC line level, lamp lights up.
Lamp turns off after 2 seconds.
When CN8-1 is +24V, ozone/suction fan rotates.
When CN8-2 is +24V, dust collecting
fan rotates.
When CN8-7 is +24V, developer cooling fan rotates.
When CN7-11 is +24V, solenoid operates.
When CN116-2 is +24V, solenoid operates.
When CN106-3 is +24V, fan motor 2 rotates.
When CN106-6 is +24V, fan motor 2 rotates.
When CN106-9 is +24V, fan motor 1 rotates.
When CN106-12 is +24V, fan motor 4 rotates.
When CN107-3 is +24V, fan motor 2 rotates.
When CN107-6 is +24V, fan motor 3 rotates.
When CN109-2 is +24V, lift motor rotates.
When CN102-2 is +24V, solenoid operates.
When CN111-20 is +24V, solenoid operates.
When CN112-2 is +24V, count up by one.
5-11