Panasonic FP-7818 Service Manual & Parts Manual page 104

Code Item
54 Registration void of image
(During use with ADF = NO
swing back condition)
55 Original stop position
(2 in 1 mode)
(FA-A888)
56 Original interval
(2 in 1 mode) (FA-A888)
57 Registration width guide
standard position (Duplex)
58 Registration length guide
standard position (Duplex)
59 Not used
60-61 Not used
62 Toner density sensor gain
voltage
63 Limitation of maximum copy Selection of maximum
number
64 Not used
65 Black density sensor
reference voltage
compensation
66 Black density sensor output
gain/compensation
67 Copy density rank
adjustment
(P mode light side)
68 Copy density rank
adjustment
(P mode dark side)
69 Not used
70 LCD contrast adjustment
71 Coordinates compensation
for touch panel (X1)
72 Coordinates compensation
for touch panel (Y1)
73 Coordinates compensation
for touch panel (X2)
74 Coordinates compensation
for touch panel (Y2)
Function
Adjustment of registration 0.425mm
void. (FP-7850/7818)
0.375mm (FP-7845)
0.525mm
(FP-7835/7830/7824)
(0 to +99)
Adjustment of original stop 0.4mm
position from original guide (–32 to +32)
plate
Adjustment of original 0.7mm
interval timing (–16 to +8)
Adjustment of registration 0.39mm
width guide position (–10 to +10)
Adjustment of registration 0.31mm
length guide position (–12 to +12)
Adjustment of toner 0.033V
density sensor gain voltage. (–5 to +5)
0 to 99
copy number of continuous
copy mode
Reference voltage for –99 to +99
black density sensor
Compensate value for –99 to +99
black density sensor
output
Adjust copy density rank –99 to +99
change for photo mode
(Light side)
Adjust copy density rank –99 to +99
change for photo mode
(Dark side)
Reference voltage –46 to +18
adjustment for LCD 60mV
contrast
Coordinates compensation –50 to +50
value (X1 point) 0.5mm
Coordinates compensation –99 to +99
value (Y1 point) 0.5mm
Coordinates compensation –50 to +50
value (X2 point)
Coordinates compensation –99 to +99
value (Y2 point)
Remarks
with A888
with A888
(Except FP-7818)
(Except FP-7818)
(FP-7850/7845)
(FP-7850/7845)
(FP-7850/7845)
(FP-7850/7845)
(FP-7850/7845)
5-27