Panasonic FP-7818 Service Manual & Parts Manual page 143

Location
9
Hopper
Toner
bottle
10
Paper guide (left)
Paper guides
(front/rear)
6-6
Shipping material/Procedure
Toner bottle insertion
(1) Open the front cover.
(2) Take a fresh bottle of toner and
shake it 10 to 15 times.
(3) Swing the toner bottle hopper open
90 degrees.
(4) Remove the toner bottle cap.
(5) Insert the toner bottle into the
hopper unit and turn it clockwise.
Note: Make sure the arrows on the
bottle and the hopper are
aligned.
(6) Close the front cover.
Paper size setting
(1) Pull the paper drawer out until it
stops.
(2) Position the paper guides (front/
rear) to the paper size required. If
the size will remain fixed, install the
screws to lock down the paper
guides.
(3) Position the paper guide (left) to
the paper size required and install
the paper guide screw.
(4) Push in the paper tray.
(5) Select F5-15.
(6) Select the desired paper size.
(7) Press the "User Preset" and
"Clear/Stop" key simultaneously to
escape from the F mode.
(8) Take out and reinsert the indicator
so the selected paper size is
shown.
Check