1) Replacement of the paper feed roller and the Pick-up roller
1
1
2
2
2
3
2
1
4
3
4-12
1) Remove the right cover and rear cover.
3
2) Open the copier paper feed cover.
3) Remove the paper feed cover stopper.
Note: Move the stopper to the larger hole
and remove.
1) Disconnect the harness of the paper feed
unit.
1
2) Remove the paper feed unit (4 screws).
1) Remove the touch ring.
2) Remove paper feed roller.
3) Remove the bracket guide.
4) Remove the the pick-up roller.
Note: Confirm the direction of the rollers
before the installation.