Panasonic FP-7818 Service Manual & Parts Manual page 86

Code Function
No.
20 For FA-S575
a) Motor clock sensor
b) Bin ass'y upper/lower limit switch Bin is beyond the upper
c) Cable safety switch
d) Bin ass'y position sensor 2
e) Bin ass'y position sensor 1
f) Paper exit sensor
g) Paper feed sensor
For FA-S615
a) Bin lower limit switch
b) Bin cam home position sensor
c) Tamper home position
sensor
d) Transfer motor clock sensor
21 For FA-S575
a) Sorter detection switch
For FA-S615
a) Bin paper detecting sensor
b) Paper detection sensor for JAM
c) Stapler detection sensor
22 For FA-S680
a) Sorter interlock switch
b) Paper transport cover open/close Cover opened.
23 For FA-S680
a) Bin home position switch
b) Bin cam switch
c) Tamper home position
sensor
Condition
7
Signal is detected.
limit or beyond the lower limit.
Cable is not loose.
Bin ass'y position is not placed
correctly.
Bin ass'y position is top Bin
ass'y. (#1 bin)
Paper is not detected.
Paper is not detected.
Bin is placed less than lower
limit.
Cam in home position.
Bar in home position.
Clock signal is detected.
Sorter is pulled out.
Paper is not detected.
Paper is not detected.
Stapler is not installed.
Sorter is installed.
Bin in home position
Bin cam in home postion
Tamper in home position
Message display
6 5 4 3 2 1 0
5-9