(2) Installation
Remove all shipping materials before installation.
Caution: Make sure the copier is unplugged before the installation.
Location
1
3
2
Left cover
2
3
Power cord mounting bracket
4
Sorter receiving
bracket (rear)
6-12
(1) Open the front door.
(2) When using the exit tray, remove
the exit tray.
(3) Open the exit cover.
1
(1) Remove the left cover. (3 screws)
(2) Remove the rear cover. (7 screws)
Remove the power cord mounting
bracket. (2 screws)
(1) Remove the lower cassette rail
fixing screw. (rear side X 1)
(2) Install the sorter receiving bracket
2
(rear).
(1 screw: just removed,
1
1 screw: included)
(3) Reinstall the power cord mounting
bracket. (2 screws removed)
Procedure
Check