Panasonic FP-7818 Service Manual & Parts Manual page 103

Code Item
37 Registration of original
for the automatic document
feeder
(2-side original feeding)
38 Image density (black level)
judgment standard voltage
39-40 Not used
41 Paper loop
(Sheet bypass)
42 Paper loop
(ADU)
43 Paper loop
(Except FP-7818)
(Copier paper tray lower)
44 Paper loop
(System console)
45 Paper loop
LCC (Except FP-7818/7824)
46 Paper feeding
(ADU)
47 Paper feeding
(Copier paper tray, lower)
48 Paper feeding
(System console, upper)
49-50 Not used
52 Reduction mode focus
53 Enlargement mode focus
5-26
Function
Adjustment of registration 0.4mm
timing (–32 to +32)
Adjustment of judgment 19.5mV
standard voltage. (–99 to +99)
Adjustment for length of 1.25ms.
the loop formed before the (–40 to +40)
copier timing roller.
same as F6-41 1.25ms.
*When installed duplex (–50 to +50)
unit, second copy feeding.
same as F6-41 1.25ms.
(–50 to +50)
Adjust the length of 1.25ms.
the loop formed before the (–50 to +50)
registration roller of
system console.
same as F6-41 1.25ms.
(–50 to +50)
Adjustment of registration 10.0ms.
timing (–50 to +50)
same as F6-46 10.0ms.
(–50 to +50)
same as F6-46 10.0ms.
(–50 to +50)
This must be adjusted if (–9 to +9)
this focus changes after
adjustment of F6-02.
This must be adjusted if (–9 to +9)
this focus changes after
adjustment of F6-02.
Remarks
with A888
0.8mm (FP-7850)
0.7mm (FP-7845)
0.5mm (FP-7835/
7830/7824)
0.4mm (FP-7818)
0.7mm
(FP-7850/7845)
0.4mm (FP-7835/
7830/7824/7818)
0.7mm
(FP-7850/7845)
0.4mm (FP-7835/
7830/7824)
0.7mm
(FP-7850/7845)
0.4mm (FP-7835/
7830/7824/7818)
0.7mm
(FP-7850/7845)
0.4mm
(FP-7835/7830)
5.4mm
(FP-7850/7845)
3.3mm (FP-7835/
7830/7824/7818)
same as F6-46
same as F6-46