2-Area Intelligent Eye Operation - Daikin Super Multi Plus E-Series FTXG25EV1BW Service Manual

Indoor Unit Control (RA Models)

7.11 2-Area INTELLIGENT EYE Operation

Outline Wall Mounted Type G-Series 20-50 Class
The following functions can be performed by a motion sensor (INTELLIGENT EYE).
1. Reduction of the capacity when there is nobody in the room in order to save electricity
2. Dividing the room into plural areas and detecting existence of humans in each area. Moving
Detail 1. Detection method of INTELLIGENT EYE
Sensor output
Detection signal
from the sensor
(Human motion)
Human detection
signal
112
(energy saving operation)
the airflow direction to the area with no human automatically to avoid direct airflow on
humans.
sampling (20 msec.)
High
Low
(Condition of 10 times or more output)
ON
OFF
(Continue 3 sec.)
ON
OFF
This sensor detects human motion by receiving infrared rays and displays the pulse wave
output.
The microcomputer in the indoor unit carries out a sampling every 20 msec. and if it detects
10 cycles of the wave in one second in total (corresponding to 20 msec. × 10 = 200 msec.),
and when the ON signal continues 3 sec., it judges human is in the room as the motion
signal is ON
2-area INTELLIGENT EYE sensor is divided into 2 areas and detects humans in each area.
Image of 2-area INTELLIGENT EYE
1 sec.
If the detection signal (ON) continues 3 sec. or more,
it judges humans exist.
Indoor unit
Area B Area A
· A microcomputer judges human existence by
the sensor signal from each area A and B.
SiBE18-821_C
If the sensor detects the outputs 10 times/sec.
or more, it judges humans exist.
Wall
Top view
(R12276)
(R12757)
Function