Daikin Super Multi Plus E-Series FTXG25EV1BW Service Manual page 461

SiBE18-821_C
Step
8 Disconnect the brazed
part of the solenoid
valve.
Removal Procedure
Procedure
Solenoid valve for
hot gas bypass
Solenoid valve for unloading
Points
Note:
Do not use a metal saw for
cutting pipes by all means
because the sawdust comes
into the circuit.
When withdrawing the pipes,
be careful not to pinch them
firmly with pliers. The pipes
may get deformed.
Provide a protective sheet or
a steel plate so that the
brazing flame cannot
(R12983)
influence peripheries.
(R12984)
Outdoor Unit
449