SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series
4
English
294
• Press
buttons to move the
highlighted item and press
to select the desired operation.
The following three types of operations are
available.
*1. switch on the installation at a scheduled time,
in combination with a set point (exact
temperature control)
*2. switch on the installation at a scheduled time,
in limit operation
*3. switch off the installation (end of control)
* The status remain unchanged in the case of "–".
The display changes in sequence as shown below
when
buttons are pressed.
—
22°C
20°C-26°C
*
*1
• To make an operation change at set
temperature, press
move the highlighted item and press
buttons to set the operation to
• To change the set temperature, press
the Menu/Enter button so that the set
temperature will be highlighted and
ready to be changed.
• Press
buttons to change the set
temperature.
The set temperature will increase by
1°C when the
button is pressed and
decrease by 1°C when the
pressed.
• Pressing Menu/Enter button enters the
set temperature change.
buttons
OFF
*2
*3
buttons to
.
button is
SiBE18-821_C
37
Operation Manual