DataCard ImageCard series Manual page 36

2-20
Getting started
Figure 2:-15 Locating the power and Ready buttons (Express and S models
Print a Windows test page card
Ready button
Power button
The printer must be connected to a PC to print this type of test card.
1.
Select Settings and then Printers from the Windows Start menu (see
Figure 2:-10 on page 2-12). The Printers window appears.
2.
Click once on the printer driver icon. The icon has the name chosen
during installation.
3.
Select Properties from the File menu. The printer's Properties dialog
box appears (see Figure 2:-18 if you are using Windows 95/98 or
Figure 2:-19 for Windows NT).
4.
Select the Print Test Page button on the General tab. The printer
prints a Windows test page card.
This card is created by Microsoft Windows and looks similar to the
top of the Windows test page. Because of the small size of a card as
compared to a sheet of paper, it is normal for only the top part of the
test page to appear and for some of the text to appear to be going off
the card. For examples, see Figure 2:-16 and Figure 2:-17.
74030s1
shown)
!