Loading Supplies; Loading Blank Cards - DataCard ImageCard series Manual

ImageCard/UltraGrafix (Express and Select Classes) User's Guide

Loading supplies

These are the printer supplies you will need to replace most often:
•
•

Loading blank cards

The printer has a translucent card cartridge so that you can easily see how
many cards are loaded. When it is empty, reload it. To order additional
cards, contact your DataCard-authorized service provider or your card
vendor. For information on card requirements, see Appendix B.
Load blank cards
74030v21
Figure 2:-3 Connections for printers with the smart card option
Blank cards
Ribbon
You can also replace the printhead cartridge. See Replacing the printhead
cartridge in Chapter 5 for instructions.
1.
Lift the card cartridge up and out of the card cartridge cavity (see
Figure ).
2:-4
2.
Place blank cards into the card cartridge. Do not touch the surface of
the cards.
For magnetic stripe cards, the magnetic stripe must be facing down
and positioned toward the right side of the printer (see Figure
Interface Cable
PC
Smart Card Cable
Power Cable
2-5
).
2:-5