DataCard ImageCard Datasheet

SPECIFICATIONS:
Yield: See attached tables for card yields. Listed yields are approximate number of cards/images
that can be produced per supply unit. Actual yields may vary due to number of printer
initializations, user loading procedures, and other waste factors.
Industry Specifications: All DuraGard 1.0 Mil Clear laminates offer superior tamper and
moisture resistance; as well as exceed the following industry standard specifications:
ISO/IEC 7810
ISO/IEC 10373-1
ANSI INCITS 322-2002
Storage and Shipping:
Temperature: 32 – 90° F (0 - 38° C)
Humidity: 20 - 70% RH, non-condensing
Sunlight: No direct exposure to sunlight
Laminate Dimensions:
PRINTER
®
Datacard SP75 Card Printer
®
Datacard ImageCard
®
Datacard Magna™ Class Card
Printers
** Margin is the distance between the edge of the card and the edge of the laminate.
Configurations Available:
Full card, full card with smart card cutout, full card with smart card window
•
Magnetic stripe
•
Other configurations available upon request
•
Usage Recommendations:
Datacard Group recommends the use of composite cards with a minimum of 20% polyester
•
core between top and bottom layers of PVC
When using DuraGard laminates with color ribbon, select a ribbon without a T-panel or deslect
•
the use of the T-panel within the printer driver.
™
DATACARD
CERTIFIED SUPPLIES
DATACARD
FOR USE IN DATACARD
PRINTERS
Polyester laminates designed to extend the life of
•
national ID, driver's license, and other ID cards
Datacard
•
tamper and moisture resistance
Virtual edge-to-edge laminates available for the
•
Datacard
laminates in the card industry
2.06 inches
52.32 mm
®
IV Card Printer 2.00 inches
50.80 mm
2.00 inches
50.80 mm
®
® ® ® ®
DURAGARD
® ® ® ®
® ®
DuraGard 1.0 Mil laminates offer superior
®
SP75 Card Printer are the largest CR80 sized
WIDTH HEIGHT
3.31 inches
84.07 mm
3.25 inches
82.55 mm
3.25 inches
82.55 mm
® ® ® ®
CLEAR LAMINATES
DESKTOP CARD
MARGIN **
0.016 inch
0.40 mm
0.031 inch
0.79 mm
0.031 inch
0.79 mm