DataCard ImageCard series Manual page 28

2-12
Getting started
Install the printer driver on Windows NT
See Reconfiguring the printer driver in Chapter 3 for more information
on setting up the driver.
Figure 2:-10 Display the Printers window
The following procedure applies only to Windows NT. If you are
installing the printer driver on a PC running Windows 95/98, see
Install the printer driver on Windows 95/98 on page 2-11.
To use the driver with NT, your PC must run Windows NT 4.0 with
Service Pack 3 or higher. The printer driver is not supported for PCs
with Alpha, MIPS, or PowerPC processors.
One ImageCard/UltraGrafix Express, Select or S2 printer can be
installed on the PC at a time. If you have a printer driver for another
DataCard printer installed on this PC, do the procedure called Re-
install the printer driver in Windows NT in Chapter 5 instead of this
procedure.
1.
Be sure you are logged in to the Windows NT system as the
administrator before starting this procedure.
2.
Close all open applications. Do not close Windows NT.
3.
Select Settings and then Printers from the Start menu.
4.
In the Printers window, double-click on the Add Printer icon. (Only
the administrator can use this icon to install the printer driver on the
PC.)
5.
Follow the instructions on your screen and the guidelines below to
complete the installation.
!
Select Settings and then
Printers from the Start
menu to display the
Printers window.