DataCard ImageCard series Manual page 80

Hide thumbs Also See for ImageCard series:
Table of Contents

Advertisement

5-6
Advanced information
8.
Restart the PC by selecting Shut Down from the Windows 95/98 Start
menu, then selecting Restart the computer and clicking Yes.
9.
If the printer driver you want to install is on diskettes, insert the first
diskette into the disk drive of the PC to which the printer is connected
after the PC and Windows 95/98 have restarted.
10.
Select Settings and then Printers from the Windows 95/98 Start
menu. The Printers dialog box appears.
11.
Double-click on the Add Printer icon.
12.
Follow the instructions on your screen and the guidelines below to
complete the installation.
Select the Have Disk button when it appears. Insert diskette 1 at
this point and click OK. Click Next to begin installation. Remove
diskette 1 and insert diskette 2 when prompted.
When you are updating, select the "Replace existing driver"
choice in the Add Printer wizard, and not the recommended
"Keep existing driver" choice.
When the Printer Name box appears, change the printer name to
match the name on the front of your printer. For example, you
might change "DataCard Select Class" to "ImageCard S2" or
"UltraGrafix S". Do not use the <>:"/\ and | characters in the
name.
If you are attaching two ImageCard/UltraGrafix series printers
(Express, S or S2 models) to the same PC, Windows 95/98 will
add the copy number to the name of each printer driver. See
Installing a second printer (Windows 95/98 only) on page 5-11 for
more information on installing two printers.
Remove the diskette and insert the next diskette when prompted.
The Version conflict dialog might display as files are copied.
Select Yes to keep the existing files on your PC.
The Code Page Mismatch dialog might display as files are copied.
Select Yes to keep the existing files on your PC.
If you downloaded the driver from the Internet, you can delete
the folder and the disk1 and disk2 folders from your hard drive
after installing the printer driver. You also can delete the
downloaded file.
13.
If you used diskettes to install the printer driver, remove the diskette
after the printer driver is installed.
14.
If you see messages instructing you to restart Windows 95/98 or to
update the printer firmware, follow them.
!

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ultragrafix series

Table of Contents