Connecting The Machine To The Power Supply; Foot Control - Janome QS2250 Instruction Manual

Janome 2250 Instruction Manual
w
y
www.aaasewing.com
q
t
r

Connecting the Machine to the Power Supply

Before connecting the power cord, make sure the
voltage and frequency shown on the machine conform to
e
your electrical power.
1. Turn off the power switch
2. Insert the machine plug
r
.
3. Insert the power supply plug
4. Turn on the power switch
sewing light.
q
Power supply plug
w
Power switch
e
Outlet
r
Machine socket
t
Machine plug
y

Foot control

Foot control
Sewing speed can be varied by the foot control.
The harder you press on the control, the faster the
machine runs.
OPERATING INSTRUCTION:
The symbol "0" on a switch indicates the "off" position of
a switch.
For appliances with a polarized plug (one blade wider
than the other):
To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to
install the proper outlet.
Do not modify the plug in any way.
Foot Controller YC-482J or TJC-150 for use with Sewing
Machine QS2250.
10
w
.
t
into the machine socket
q e
into the outlet .
w
to turn on the power and
QS2250 Owners Manual/ User Guide