Darning Foot - Janome QS2250 Instruction Manual

Janome 2250 Instruction Manual

Darning Foot (200-117-100)

Machine setting
Stitch:
Thread tension:
Pressure adjusting dial: 1
Stitch length:
Stitch width:
Feed dogs:
www.aaasewing.com
C
2 - 6
Any
2 - 5
Dropped
Drop the feed dogs. Center the hole in the fabric on
an embroidery hoop, as shown.
Lower the darning foot and sew at a slow speed.
Move the fabric back and forth slowly until the
darning area is covered.
Turn the fabric a 1/4Ó (90 degrees), and sew another
layer of stitching over the first layer.
After darning is completed, return the pressure
adjusting dial to 3 for normal sewing.
6
QS2250 Owners Manual/ User Guide