Changing Needles; Thread And Needle Chart - Janome QS2250 Instruction Manual

Janome 2250 Instruction Manual
www.aaasewing.com

Changing Needles

Raise the needle by turning the handwheel toward you
and lower the presser foot.
Loosen the needle clamp screw by turning it
counterclockwise.
Remove the needle from the clamp.
Insert the new needle into the clamp with the flat side
away from you.
When inserting the needle into the clamp, push it up as
far as it will go and tighten the clamp screw firmly with
the screwdriver.
* Check your needles frequently for barbed or blunted
points. Snags and runs in knits, fine silks and silk-like
fabrics are permanent and are almost always caused
by a damaged needle.

Thread and Needle Chart

Fabrics
Crepe de Chine, Voile, Fine Silk`
Light
Lawn, Organdy,
weight
Georgette,
Tricot
Linens, Cotton, Pique, 50 silk
Medium
Serge, Double Knits,
weight
Percale
Denim, Tweed,
Heavy
weight Gabardine,
Coating, Drapery and
Upholstery Fabric
* In general, fine thread and needles are used for
sewing thin fabrics, and thicker threads and needles
are used for sewing heavy fabrics. Always test thread
and needle size on a small piece of fabric which will
be used for actual sewing.
* Use the same thread for needle and bobbin.
* When sewing stretch, very fine fabrics and synthetics,
use a BLUE TIPPED needle.
The blue tipped needle effectively prevents skipped
stitches.
* When sewing very fine fabrics, sew over a piece of
paper to prevent yarn distortion.
14
Needle Size
Thread
9
Fine Cotton or
Fine Synthetic 11
Fine Cotton
Covered
Polyester
11
50 to 80 Cotton or
50 to 60 14
Synthetic
Cotton Covered
Polyester
50 silk 14
40 to 50 Cotton or
40 to 50 16
Synthetic
Cotton Covered
Polyester
QS2250 Owners Manual/ User Guide