Janome QS2250 Instruction Manual page 51

Janome 2250 Instruction Manual
.
⁄ 0 ⁄ 1
⁄ 2
y
⁄ 3
www.aaasewing.com
.
Sew slowly and stop the machine at the starting
point when a buttonhole is completed.
* The front bartack and left row first, then the back
bartack and right row.
⁄0
Cut both needle and bobbin threads leaving about
10 cm (4˝) thread ends.
Draw the needle thread to wrong side of fabric by
pulling the bobbin thread.
Then, knot the threads.
⁄1
Insert a pin inside the bartack.
Then cut the opening with seam ripper.
Take care not to cut the stitches.
⁄2
To make the next buttonhole.
To continue the same size of buttonhole stitching,
u
return the pattern selector dial to
u
Now, simply step on the foot control sew an
identical buttonhole.
⁄3
When buttonhole sewing is finished, push the
buttonhole lever upward as far as it will go.
48
again, as shown.
QS2250 Owners Manual/ User Guide
y
, then back to