Getting Ready To Sew Connecting Machine To Power Supply; Controlling Sewing Speed - Janome HD9 Instruction Book

GETTING READY TO SEW
Connecting Machine to Power Supply
CAUTION
Always turn the power switch off and
unplug the sewing machine from the
electrical outlet when the machine is not
in use.
q Machine plug
w Machine socket for power supply plug
e Power supply plug
r Outlet
t Machine socket for foot control
y Foot control plug
u Foot control
i Power switch
Turn off the power switch i.
Insert the foot control plug y into the
machine socket t.
Insert the machine plug q into the
machine socket w.
Insert the power supply plug e into the
wall outlet r.
Turn on the power switch i.

Controlling Sewing Speed

Speed control slider
Sewing speed can be varied with the speed control
slider according to your sewing needs.
To increase sewing speed, slide it to the right.
To decrease sewing speed, slide it to the left.
Foot control
Sewing speed is varied by the foot control.
The harder you press down on the foot control, the
faster the machine runs.
The machine runs at the maximum speed set by the
speed control slider when the foot control is being fully
depressed.
Operating Instructions:
The symbol "O" on a switch indicates the "off" position of a switch.
For appliances with a polarized plug (one blade wider than the other): To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If it does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.
"Foot control Model 21381 for use with this sewing machine" (For U.S.A market only).
u
8
i
w
q
y
t
r
e