To Use Needle Threader; Pressure Adjusting Dial - Janome QS2250 Instruction Manual

Janome 2250 Instruction Manual
z
x
w
c
v
www.aaasewing.com

To Use Needle Threader

z
Raise the needle to its highest position.
Pull down the needle threader as far as it will go.
x
Turn the knob in the direction of the arrow in the
illustration, then insert the hook
eye.
Read the thread around guide
q
hook .
q
Guide
w
Hook
q
c
Turn the knob in the direction of the arrow in the
illustration, drawing the thread loop through the
needle.
v
Pull the thread through the needle eye.
* The needle threader can be used with a #11 to
#16 needle or a Blue tip needle.
Thread size 50 to 100 should be work well.

Pressure Adjusting Dial

The pressure dial should be set at 3 for regular sewing.
Reduce the pressure to 2 for applique, cutwork, drawn
work, basting and embroidery. Set the pressure to "1"
when sewing chiffon, lace, organdy and other fabrics.
Velours and knits with a lot of stretch may require at 1
setting. Alingn the setting mark on the dial with the
desired number.
24
q
into the needle
w
and under the
QS2250 Owners Manual/ User Guide