Winding The Bobbin - Janome QS2250 Instruction Manual

Janome 2250 Instruction Manual
z
x
b
www.aaasewing.com
c
v
n
m

Winding the Bobbin

z
Pull the handwheel out.
x
Draw the thread from the spool.
Guide the thread around the bobbin winder thread
guide.
c
Insert the thread through the hole in the bobbin from
the inside to the outside.
Put the bobbin on the bobbin winder spindle.
v
Push it to the right.
b
With the free end of the thread held in your hand,
depress the foot control.
Stop the machine when it has made a few turns, and
cut the thread close to the hole in the bobbin.
n
Depress the foot control again.
When the bobbin is fully wound, stop the machine.
Return the bobbin winder spindle to its original
position by moving the spindle to the left, and cut the
thread.
m
Push the handwheel to the left. (original position).
NOTE:
Return the bobbin winder spindle when
the machine stops.
18
QS2250 Owners Manual/ User Guide