Janome MEMORY CRAFT 9500 Instruction Book
  1. Manuals
  2. Brands
  3. Janome Manuals
  4. Sewing Machine
  5. MEMORY CRAFT 9500
  6. Instruction book

Janome MEMORY CRAFT 9500 Instruction Book

Janome sewing machine user manual
Hide thumbs Also See for MEMORY CRAFT 9500:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual

Advertisement

Table of Contents
loading

Related Manuals for Janome MEMORY CRAFT 9500

Summary of Contents for Janome MEMORY CRAFT 9500

  • Page 2: Table Of Contents

    KNOW YOUR MACHINE ... 2 Name of Parts ... 2 Standard Accessories and Storage ... 3 Extension Table ... 5 GETTING READY TO SEW ... 6 Connecting the Power Supply ... 6 Function Buttons ... 7 Controlling Sewing Speed ... 8 Raising and Lowering the Presser Foot ...

  • Page 3: Know Your Machine

    KNOW YOUR MACHINE Name of Parts 1. Top Cover 2. Spool Pin 3. Spool Holder (Large) 4. Foot Storage Compartment 5. Bobbin Thread Cutter 6. Bobbin Winder Spindle 7. Bobbin Winder Stopper 8. Visual Touch Screen 9. Speed Control Lever 10.

  • Page 4: Standard Accessories And Storage

    Standard Accessories and Storage 1. Embroidery Hoop (A) (with Template) 2. Embroidery Hoop (B) (with Template) 3. Foot Control 4. Instruction Book 5. Template Sheets (for Built-in Designs) 6. Power Supply Cord 7. Hard Cover (Carrying Case) 8. Zipper Foot E 9.
  • Page 5 1. Automatic Buttonhole Foot R 2. Overcasting Foot M 3. Button Sewing Foot T 4. Basting/Darning Foot P-2 5. Screwdriver 6. Screwdriver 7. Scissors 8. Set of Needles 9. Spool Pin Felt 10. Lint Brush 11. Additional Spool Pin 12. Seam Ripper 13.

  • Page 6: Extension Table

    Extension Table For free arm sewing To remove, lift out the Extension Table toward you as illustrated. 1 Extension Table Free Arm sewing is suitable for: - stitching sleeves, waistbands, pants legs or any circular garment area. - darning socks or mending knees, elbows or children’s wear.

  • Page 7: Getting Ready To Sew

    GETTING READY TO SEW Connecting the Power Supply The Memory Craft 9500 is equipped with an auto voltage system, which automatically adjusts the equipment to any local power supply voltage between 100 and 240V, 50/60 Hz. First, turn off the Power Switch. Then insert the Foot Control Plug and Machine Plug into the Machine Socket.

  • Page 8: Function Buttons

    Function Buttons 1 Start/Stop Button Press this button to start or stop the machine. This button can be used either in the Ordinary Sewing Mode or Embroidery Mode. In the Ordinary Sewing Mode, the machine starts running slowly for the first few stitches, it then runs at the speed set by the Speed Control Lever.

  • Page 9: Controlling Sewing Speed

    Foot controller Model 21371 is for use with sewing machine model MC9500. NOTE: The Memory Craft 9500 is equipped with an automatic shutdown safety feature to prevent overheating whenever the machine is running overloaded. Follow the safety instructions that appear on the Visual Touch...

  • Page 10: Raising And Lowering The Presser Foot

    Raising and Lowering the Presser Foot The Presser Foot Lifter raises and lowers the Presser Foot. You can raise the Presser Foot about 6 mm (1/4") higher than the normal up position by exerting more pressure when lifting the Presser Foot Lifter. This allows for easy removal of the Presser Foot and helps you to place thick fabrics under it.
  • Page 11 Button Sewing Foot T To Attach: Insert the Rear Pin on the foot into the Groove of the Foot Holder. Gently lower the presser bar, holding the foot with your fingers. 1 Rear Pin 2 Groove of the Foot Holder Darning Foot P-2 To Attach: Loosen the thumb screw and remove the Foot Holder.

  • Page 12: Various Presser Feet And Their Uses

    Various Presser Feet and Their Uses 1 Zigzag Foot A: This is the most versatile foot. It can be used for various stitches including straight stitches and zigzag stitches. It is designed to achieve firm and neat seam results. 2 Overedge Foot C: This foot is exclusively for overedging.

  • Page 13: Winding The Bobbin

    Winding the Bobbin Removing the bobbin 1 Slide the Hook Cover Plate Release Button to the right, and remove the Hook Cover Plate. 1 Hook Cover Plate Release Button 2 Hook Cover Plate 2 Lift out the Bobbin from the Bobbin Holder. 3 Bobbin Setting the Spool of Thread Lift up the Spool Pin.

  • Page 14: Threading For Bobbin Winding

    Threading for bobbin winding 1 Hold the upper thread with both hands and place it down into the Slit. 2 Guide the thread around the Thread Guide following the dashed line as shown in the diagram. 3 Thread through the hole in the Bobbin from the inside to the outside.

  • Page 15: Inserting The Bobbin

    Inserting the Bobbin 1 Place the Bobbin in the Bobbin Holder with the Thread running off counterclockwise. 2 Guide the thread into the Front Notch (A) on the 3 Draw the thread to the left, sliding it between the tension spring blades. 4 Continue to draw the thread lightly until the thread slips into the Side Notch (B).

  • Page 16: Threading The Machine

    Threading the Machine Raise the Presser Foot Lifter. Press the Up/Down Needle Button twice to raise the needle to its highest position. 1 Hold the upper thread with both hands as shown and place it down into the Slit. 2 Draw the thread around the Thread Guide following the dashed line as shown in the diagram.

  • Page 17: Built-In Needle Threader

    Built-in Needle Threader Raise the needle to its highest position by pressing the Up/Down Needle Button twice. 2 Turn the power switch off. 3 Lower the presser foot. 4 Depress the Needle Threader Knob as far as it will go. The hook comes out through the needle eye from behind.

  • Page 18: Drawing Up The Bobbin Thread

    Drawing Up the Bobbin Thread 1 Raise the Presser Foot Lifter. 2 Hold the needle thread with your fingers and press the Up/Down Needle Button twice to pick up the bobbin thread. Draw up the needle thread to bring up a loop of the Bobbin Thread.

  • Page 19: Changing Needles

    WEIGHT FABRIC Very Light Chiffon, Georgette, Fine Lace, Organdy Net, Tulle Light Batiste, Voile, Lawn, Pure Silk, Crepe de Chine, Sheer Crepe, Chambray, Handkerchief Linen, Gingham, Challis, Percale, Wool Crepe, Peau de Soie, Taffeta, Satin, Silk Surah, Satin-backed Crepe, Qiana Single Knits, Jersey, Swim wear, and Tricot Leather Suede Flannel, Velour, Velvet, Muslin, Velveteen,...

  • Page 20: Balancing Thread Tension

    Balancing Thread Tension Auto tension This machine features an Auto setting in the tension control, which covers a wide range of sewing condition. Set the tension control dial at Auto for general sewing, unless specifically indicated in this manual. 1 Setting Mark Correct tension: The ideal straight stitch has threads locked between two layers of fabric...

  • Page 21: Adjusting The Foot Pressure

    Adjusting the Foot Pressure The foot pressure control dial should be set at “3” for regular sewing. Reduce the pressure to “2” for applique, cut work, drawn work and basting. Set the dial at “1” when sewing extra fine fabrics. Foot pressure control dial 1 Setting mark Dropping the Feed Dog...

  • Page 22: Mode Selection

    Straight Stitch Auto Adjust Mode Selection When you turn on the power switch, the Visual Touch Screen will show the opening “Welcome” window, then the Ordinary Sewing Mode will appear after a few seconds. The machine will be set for the straight stitch sewing. NOTE;...

  • Page 23: Setting Mode

    Designs Hoop Size A(F): 126 110mm Screen Contrast Eco Mode inch/mm inch Register SETTING MODE Pressing the SET key will open the mode setting window. SET key Press the SET key to customize the machine settings. Flag key (Language selection key) Edit Press the flag key to select the language for the screen display.
  • Page 24 Screen Contrast Eco Mode inch/mm inch Register Inch/Millimeter You can set your machine’s measuring unit to either inch or millimeter depending upon your preference. The default unit setting is millimeter. Press the “inch” or “mm” key to select the unit you preferred.
  • Page 25 Sewing Light Register Key Position Adjustment PRESS MARK ( ) Key Position Adjustment Thread selection Robison- Madeira Janome Anton Format Built-in Memory ATA PC Card Reset all to defaults Register 10 Key position adjustment If you think the touch panel keys are out of alignment, you can calibrate them in the key position adjustment window.

  • Page 26: Language Selection

    Language Selection You can select one of the following 11 languages by pressing the corresponding key. English French Spanish Italian Dutch German Portuguese Swedish Russian Finnish Japanese...

  • Page 27: Ordinary Sewing

    Straight Stitch Straight Stitch ORDINARY SEWING Pattern Selection Auto Press the Stitch Pattern Key to select the desired pattern. The Name of the Stitch, Stitch Image of the selected pattern, the recommended foot and machine settings will appear on the screen. Use the recommended foot and machine settings unless otherwise stated in this manual.

  • Page 28: Utility Stitches

    Straight Stitch Utility Stitches Auto Straight stitch Press Pattern 1 on the Visual Touch Screen. To sew: Raise the Presser Foot and position the fabric next to a seam guideline on the needle plate. Lower the Adjust needle to the point where you want to start. Pull the needle and bobbin threads towards the rear.
  • Page 29 Securing seam For fastening the ends of seams, press the Reverse Button and sew several reverse stitches. The machine sews in reverse as long as you press and hold the Reverse Button. Press the Reverse Button once when sewing the Lock-a-Matic stitch (pattern 3) or Locking stitch (pattern 4) so the machine will lock the stitch off and stop automatically.

  • Page 30: Adjusting The Needle Drop Position And Stitch Length

    Straight Stitch Auto Adjust Default 2.20 Cancel Adjusting the needle drop position and stitch length When you press the Adjust key, the screen shows the manual setting window. Press the position or stitch length. key to change the needle drop 1 Needle Drop Position Adjusting Keys 2 Stitch Length Adjusting Keys 3 Default Key: Resumes the default settings.
  • Page 31 Default 2.20 Cancel Default 2.20 Cancel Changing needle drop position When you press the the right. When you press the the left. Changing stitch length Press the key to decrease the stitch length. Press the key to increase the stitch length. key, the needle moves to key, the needle moves to...

  • Page 32: Variety Of Straight Stitches

    Variety of straight stitches 02 Straight Stitch in Left Needle Position Use this stitch to seam the edge of the fabrics. 03 Lock-a-Matic Stitch Use this stitch to secure the beginning and the end of a seam with backstitching. When you reach the end of the seam, press the Reverse Button once.

  • Page 33: Zigzag Stitch

    Zigzag Stitch Default 1.50 Cancel Zigzag stitch Auto This stitch is used for various sewing needs including overcasting. It can be used on most woven fabrics. It is the fastest way to finish an edge, leaving it neat and flat. A dense zigzag stitch can also be used for applique.

  • Page 34: Changing Stitch Width

    Default 1.50 Cancel Default 1.50 Cancel Changing stitch width Press the key to decrease the Stitch Width. Press the key to increase the Stitch Width. 1 Stitch Width Changing stitch length Press the key to decrease the Stitch Length. Press the key to increase the Stitch Length.

  • Page 35: Overcasting With Zigzag Stitch

    Overcasting Overcasting with zigzag stitch Auto Select Pattern 8 and attach the Overedge Foot C. Adjust Place the fabric edge next to the Guide of the foot and then sew. 1 Guide CAUTION: When you use the Overedge Foot C or the Overcasting Foot M, you must set the zigzag width at 5.0 or wider to prevent the needle from hitting the Foot Wires.

  • Page 36: Variety Of Overcasting Stitches

    Variety of overcasting stitches Multiple Zigzag Stitch (Tricot Stitch) This stitch is used to finish a raw edge of synthetics and other stretch fabrics that tend to pucker. Sew along the fabric edge leaving an adequate seam allowance. After sewing, trim off the seam allowance closer to the stitches.

  • Page 37: Blind Hem Stitch

    Blind Hem Blind hem stitch Auto Select the patterns 11 or 12. NOTE: Pattern 11 is for stretch fabrics. Attach Blind Hem Foot G. Fold the fabric to form a hem as shown. Adjust (A) Thick fabric (B) Fine and medium weight fabric 1 0.4 - 0.7 cm (1/4”) 2 Overcasting 3 Wrong Side of Fabric...
  • Page 38 Default 2.00 Cancel Adjusting the needle drop position Press the Adjust key to open the stitch width and length adjusting window. Press the key to move the needle position to the right. Press the key to move the needle position to the left.

  • Page 39: Zipper Sewing

    Straight Stitch Zipper sewing Auto Select the pattern 01. Attach the Zipper Foot E. Adjust Attaching the zipper foot Fabric Preparation for Zipper Sewing Add 1 cm (3/8”) to the zipper size. This is the overall Opening Size. Place the right sides of the fabric together and sew to the End of the Zipper Opening.
  • Page 40 To Sew Fold back the left seam allowance. Turn under the right seam allowance to form a 0.2 to 0.3 cm (1/8") Fold. Place the zipper teeth next to the fold and pin it in place. Set the stitch length back to “2.2” and thread tension to AUTO.
  • Page 41 Close the zipper and spread the fabric open flat with the right side up. Baste the upper fabric and zipper tape together. 11 Right Side of the Fabric 12 Basting Reattach Zipper Foot E with the Left Pin. Stitch through the fabric and zipper tape. Stop about 5 cm (2”) from the top of the zipper.

  • Page 42: Quilting

    Straight Stitch Quilting Auto Select the pattern 01. Adjust Regular quilting Use this Quilting Bar with the Zigzag Foot. Loosen the Screw on the back of the Foot Holder and insert the Quilting Bar into the Hole of the Foot Holder. Set the Quilting Bar to the desired position, then retighten the screw.

  • Page 43: Variety Of Buttonholes And Their Uses

    Sensor Auto Variety of buttonholes and their uses 13 Sensor (Square) Buttonhole This square buttonhole is widely used on medium to heavy weight fabrics. The buttonhole size is automatically determined by placing a button in the foot. 14 Auto (Square) Buttonhole This is also a square buttonhole similar to the Sensor Square Buttonhole, but you can manually set the buttonhole size and you memorize the size to sew...

  • Page 44: Sensor Buttonhole

    Square BH Pull down BH Lever. Sensor Auto Sensor buttonhole Auto Select the pattern 17. The buttonhole size is automatically set by placing a button into the button holder in the rear of the Automatic Buttonhole Foot R. NOTE: The button holder of the foot takes a button size of up to 2.5 cm (1") in diameter.
  • Page 45 Pull down BH Lever. Pull the Buttonhole Lever down as far as it will go. NOTE: A warning message will appear and the machine will stop automatically if you start to sew a buttonhole without pulling down the buttonhole lever. Press the Return lever to restart.
  • Page 46 Completed Raise Presser Foot. Press the Start/Stop Button to sew the buttonhole. The buttonhole will be automatically sewn in a single step. The front bartack and left row first, then the right row and back bartack. The machine will stop automatically when the buttonhole is completed.

  • Page 47: Corded Buttonhole

    Square BH Auto Pull down BH Lever. Sensor Auto Adjust Corded buttonhole To sew the corded buttonhole, follow the same procedure as for the Sensor Buttonhole; refer to the instructions on pages 43 to 45. Select the pattern 13. With the Automatic Buttonhole Foot R raised, hook the filler cord on the Spur on the back of the buttonhole foot.

  • Page 48: Changing Buttonhole Width

    Default 0.45 Cancel Default 0.45 Cancel Changing buttonhole width Press the Adjust key and the adjusting window will open. Press the key to increase the buttonhole width Press the key to decrease the buttonhole width Press the OK key to register the settings. NOTE: Default setting is 5.0 Changing buttonhole stitch density...

  • Page 49: Automatic Buttonhole

    Auto BH Auto Pull Button Holder firmly. Sensor Auto Adjust Automatic buttonhole Select the pattern 14. Attach the Automatic Buttonhole Foot R. Pull the Button Holder all the way out. Mark the buttonhole position on the fabric. Insert the fabric under the foot. Press the Up/Down Needle Button twice.
  • Page 50 Step1 Sew to length required, then press " Step2 Sew up to start Position, then press " Step3 Machine stops when BH is completed. Restart for the Same Size. Different size Cancel Step-1 Sew up the left side until the end of the buttonhole Auto mark.

  • Page 51: Button Sewing

    Button Sewing Auto Sensor Auto Adjust Button sewing Select the pattern 20 and the feed dog will automatically drop. Place a button on the fabric and lower the needle by turning the handwheel with your hand, so that the needle enters through the left hole in the button. Align the direction of the button and lower the Button Sewing Foot T to hold the button in place.

  • Page 52: Darning

    ". Sensor Auto Darning Auto The Memory Craft 9500 automatically darns rips and holes. Large and small holes can be mended quickly and easily with this unique stitch. Select the pattern 21. Adjust Attach the Automatic Buttonhole Foot R and pull the Button Holder all the way out.
  • Page 53 Restart for the Same Size. Different size Cancel Default Default Cancel Cancel To sew a shorter darning To sew a darning with a length of less than 2 cm (3/4”), first stop the machine after sewing the Required Length, then press the Reverse Button. The Required Length has now been determined.

  • Page 54: Tacking

    Tacking Sew to length required, then press " ". Sensor Auto Restart for the Same Size. Different size Tacking Auto Tacking is used to reinforce pockets, crotches and belt carriers where extra strength is needed. Select Pattern 22 and attach the Satin Stitch Foot F. Adjust The machine will sew a tacking of 1.5 cm (9/16”) long automatically.

  • Page 55: Eyelet

    Eyelet Auto Sensor Auto Adjust Default Cancel Eyelet The Eyelet is used for belt holes etc. Select the pattern 23 and attach the Satin Stitch Foot F. Depress the Foot Control to sew. The machine will stop automatically when completed. Open the eyelet with an awl, puncher or pointed scissors.

  • Page 56: Basting

    Basting Sensor Auto Adjust Basting Select the pattern 24 and the feed dog will automatically drop. Attach the Satin Stitch foot F or Darning Foot P-2. NOTE: Refer to page 10 for how to attach the Darning Foot P-2. To sew Hold the fabric taut and depress the Foot Control or press the Start/Stop Button.

  • Page 57: Satin Stitches

    Decorative 2.20 Satin Stitches Auto Press the Satin Stitch Key in the Ordinary Sewing Mode to open the Satin Stitch Window. Function Keys: Needle Up/Down key: Press the Needle Up/Down key to set the needle position up or down when stopping the machine.
  • Page 58 Auto Adjust Program key Press this key to program pattern combinations. When you press this key the Cursor keys, Delete key, Vertical Mirror key, “M” key (Memory Check key) and Save File key will be displayed. 10 Cursor keys Press the Cursor keys to move the cursor to the right or left.

  • Page 59: Single Pattern With Locking Stitch

    Locking Stitch Auto Decorative Single pattern with locking stitch Press the program key. Select the pattern 31. Press the “L. S” key. NOTE: No more patterns can be memorized after pressing the “L. S” key. Adjust The machine will sew a single pattern only and lock the stitch at the end then stop automatically.

  • Page 60: Elongation Sewing

    Decorative Auto Adjust Default 2.20 Cancel Elongation sewing Example: Pattern 31 Select Pattern 31. Press the Adjust key. Press the Elongation desired stitch length. NOTE: The Elongation ration is indicated in multiples of the original pattern length. Press the OK key. The setting will be registered and the screen returns to the previous window.

  • Page 61: Programming A Pattern Combination With A Mirror Image

    Decorative Programming a pattern combination with mirror Auto image Example: Pattern 30 and its mirror image Press the Program key Select the Pattern 30. Press the Mirror Image key. Select the Pattern 30. Start to sew. Adjust NOTE: If you press the Auto-Lock Button in the middle of a programmed pattern the machine will stop automatically after the current pattern is completed.

  • Page 62: Decorative Stitches

    Saddle Stitch Shell Tuck Adjust Decorative Stitches There are 7 pages of decorative stitches in this category. Press the Next Page Press the Previous Page page. Adjust Shell Tuck Stitch Select the pattern 39 on the Visual Touch Screen. Use a lightweight fabric such as tricot. Fold and stitch on the bias.

  • Page 63: Applique Sewing

    Applique Adjust Applique sewing Select the pattern 40. Attach the Satin Stitch Foot F. Place the Applique on the fabric and baste it in place. Sew guiding the edge of the applique along the Slit on the foot, so that the needle falls off the Edge of the Applique when it swings to the right.

  • Page 64: Programming French Knot

    French Knot Auto Adjust Straight Stitch Auto Adjust Programming French knot Example: Pattern 55, Pattern 45, Pattern 55 and Pattern 46 Press the program key. Select the pattern 55 (French knot). Press the previous page key to show page 2/7. Select the pattern 45.

  • Page 65: Sewing The Pattern Combination From The Beginning

    Decorative Auto Adjust Decorative Auto Adjust Decorative Sewing the pattern combination from the beginning After you start sewing, the “M” (Memory check) key will change to the Press this key if you stop sewing in the middle of the pattern combination and wish to sew it again from the beginning.

  • Page 66: Individual Pattern Adjustment

    Decorative Auto Adjust 2.20 Decorative Individual pattern adjustment You can adjust the zigzag width, stitch length and elongation ratio of each patterns in a combination individually. Example: Changing the elongation ratio of the pattern 31 in combination with the patterns 65 and 32. Press the Left Arrow key to move the cursor below the pattern 31.

  • Page 67: Editing Programmed Patterns

    Decorative Decorative Decorative Decorative Auto Adjust Decorative Decorative Editing Programmed Patterns Auto Example: When the patterns 31, 65 and 32 are memorized. Deleting the pattern 65 Press the Cursor key to move the cursor under the pattern 65. Adjust Press the Delete The pattern 65 will be deleted.

  • Page 68: Program Check

    Decorative Auto Adjust Program check Pressing the “M” (Memory check) key will display the entire pattern combination. If the pattern combination is too long to show, press the Next Page key to view the remaining patterns in combination. Press the Return Key to go back to the original window.

  • Page 69: Twin Needle Sewing

    Hemstitch Auto Adjust Decorative Auto Adjust Check the needle. This pattern is not for twin needle Sewing. Twin Needle Sewing NOTE: When you sew patterns with the twin needle, test the stitches first before you sew. Use the Zigzag Foot A or Satin Stitch Foot F for Twin Needle Sewing.
  • Page 70 Insert an additional spool pin, and put a felt and spool on it. Draw both threads from the spools and pass them through the threading points from 1 to 5 . Make sure that the two strings of thread from the spools do not get tangled.

  • Page 71: Monogramming

    Block Block Monogramming You can combine letters and symbols for monogramming. Auto 1 European Accented Letter key You can select the European Accented Letters, such as the diaeresis. Pressing the European Accented Letters alternately. 2 Upper/Lower Case key You can select Upper or Lower Case Letters Pressing the “A/a”...

  • Page 72: Programming A Monogram

    Block Auto Block Auto & Block Programming a monogram Example: Programming “R&B” Press the Upper/Lower Case Case. Press the Letter Size Press “R”, and the cursor shifts to the right and “R” is automatically memorized. Press the Letter/Number Numbers. Press the Letter Size Press “&”, and the cursor shifts to the right and “&”...

  • Page 73: Saving And Opening A File

    Block Save File (Built-in) Built-in M_001 File Name Cancel Saving and Opening a File Auto Saving a file Press the Save File key and the Save File window will open. You can select the location to where you want to save the file.

  • Page 74: Assigning A File Name

    Save File (Built-in) Built-in M_001 Card File Name Cancel Cancel Short of memory space, the file cannot be saved. The same file name is exists, overwrite it? Cancel Assigning a file name You can assign a file name in the file name window. Press the File Name window.

  • Page 75: Correcting Distorted Stretch Patterns

    – – – Correcting Distorted Stretch Patterns The sewing results of the stretch stitch patterns may vary depending upon the sewing conditions, such as sewing speed, type of the fabric, number of layers etc. Always make a test sewing on a scrap piece of the fabric that you wish to use.

  • Page 76: Embroidery Mode

    STARTING POINT FOR MONOGRAMMING STARTING POINT FOR MEMORY CARDS ( FROM K-101 ) STARTING POINT FOR BUILT-IN DESIGNS STARTING POINT EMBROIDERY MODE Embroidery Hoops Embroidery Hoop A: This is the standard size hoop, with a 12.6 cm (5”) by 11 cm (4 3/8”) embroidery area for sewing PC Card embroidery designs etc.

  • Page 77: Stabilizers

    Stabilizers To obtain the best quality embroidery, it is important to use stabilizers. Types of stabilizer Tear-away Stabilizer is made from a fiber that will tear easily. Use tear-away stabilizers for stable woven fabrics. After stitching, tear away the stabilizer so that the small portion left in the back of the stitching will not affect the wear. Iron-on Stabilizer is an adhesive type stabilizer for knits and all kinds of unstable fabrics.

  • Page 78: Setting The Fabric In An Embroidery Hoop

    Setting the Fabric in an Embroidery Hoop Mark the Centerlines on the right side of the fabric with tailor’s chalk. Loosen the Hoop Tightening Screw on the outer hoop. Lay the inner hoop and template on the fabric, matching the centerlines. Push them into the outer hoop.

  • Page 79: Attaching The Embroidery Hoop To The Machine

    START STOP Attaching the Embroidery Hoop to the Machine Turn the Attaching Knob so it is parallel with the metal plate, and set the hoop on the Carriage. Attach the hoop by fitting the Pins into the Carriage Holes. 1 Attaching Knob 2 Carriage Holes 3 Pins Turn the Attaching Knob clockwise.

  • Page 80: Mode Selection

    1 Built-in Designs The Visual Touch Screen shows the Built-in Design Edit window when the Embroidery Mode Key is pressed. the Memory Craft 9500 provides 91 ready to sew built-in embroidery designs. 2 Monogramming Press the Monogramming Key to open the Monogramming window.

  • Page 81: Built-In Designs

    Designs Hoop Size A(F): 126 110mm Ready to Sew 24 min 13 colors Size 76x62mm A(F): 126x110mm Bamboo Toast Hazel Brown Mode Built-in Designs Press the Built-in Design key. Press the pattern selection key to select the desired pattern. The embroidery screen will appear. Edit 1 Color/Part key The thread color and the sewing order of each section...

  • Page 82: Trace Outline

    Ready to Sew 24 min 13 colors Size 76x62mm A(F): 126x110mm Bamboo Toast Hazel Brown Trace outline Cancel Ready to Sew 21 min 13 colors Size 76x62mm A(F): 126x110mm Bamboo Toast Hazel Brown 00001 ST/NO 1 Trace key You can check the size of the sewing area by pressing this key.

  • Page 83: Starting To Sew Embroidery

    Designs Hoop Size A(F): 126 110mm Edit Ready to Sew 24 min 13 colors Size 76x62mm A(F): 126x110mm Bamboo Toast Brown Hazel Edit START STOP Starting to Sew Embroidery Press the Pattern Selection key to select the desired pattern. Lower the presser foot. Press the Start/Stop button and sew 5 to 6 stitches.

  • Page 84: Monogram Embroidery

    Gothic Monogram Embroidery Press the Monogram key to open the monogram window. A(F) 1 Monogram Key In the monogram selection window, you can program words by pressing the alphabet keys directly. After you press an alphabet key, the letter is Font memorized and the cursor is moved to the right.
  • Page 85 Gothic Letter/number key When you press this key, the number and symbols will appear. To select the number or symbol, press the corresponding key. A(F) Press this key again to return to the letter selection window. Delete key Characters can be deleted when they are underlined by the cursor.

  • Page 86: Monogram In Gothic Style

    Gothic A(F) Font Gothic A(F) Font Gothic A(F) Font Ready to Sew 3 min 1 color Bear Size 55x19mm A(F): 126x110mm Bear Color Change Monogram in Gothic style Press the Font key and select Gothic style letters. Select “B”. Edit Press the Upper/Lower Case key to select lowercase letters.
  • Page 87 Ready to Sew 3 min 1 colors Bear Size 55x19mm A(F): 126x110mm Bear Color Change Use the Jog keys to adjust the position of the hoop to match the centerlines. 1 Jog Keys 2 Centerlines Lower the presser foot. Press the Start/stop button and sew 5 to 6 stitches. Press the Start/stop button again to stop the machine.

  • Page 88: 2- Letters Monogram

    Gothic A(F) Font Edit Letters Letters Ready to Sew 7 min 1 color Size 53x62mm A(F): 126x110mm Color Change 2- Letters monogram Example: 2-Letters with a crest Press the Font key. Select 2-Letters. Select the Frame. Select the letter “A”. A(F) Font Edit...

  • Page 89: Correcting A Monogram

    Gothic BEAT Gothic BEAT Gothic Gothic Gothic Gothic BEAT Correcting a monogram Deleting a letter Example: To delete ”E” from “BEAT” A(F) Press the Cursor letter to delete. A(F) Press the Delete The letter “E” will be deleted. A(F) Inserting a letter Example: To insert “E”...

  • Page 90: Pc Card Designs

    PC Card NO.1001 Hoop Size A(F):126x110mm PC Card Designs Inserting and ejecting a PC Card Insert a PC card into the slot with the front side facing to you. Push the card until it clicks, then the eject button pops out.

  • Page 91: Card Reader 100000

    Designs Hoop Size A(F): 126 110mm Edit Card Reader 10000 You can download designs from the Memory Cards for Model MC9000 via the Card Reader 10000. Connecting Card Reader 10000 Insert the round connector of the special RS-2332C cable into the machine. Insert the 2 plugs into the Card Reader 10000.

  • Page 92: Editing Mode

    Designs Hoop Size A(F): 126 110mm B: 140x200mm A(F) Cancel Edit Size Cancel B: 140x200mm Edit Size Cancel A(F): 126x110mm Editing Mode The editing function allows you to modify and combine embroidery patterns to create your own original designs. Editing screen Press the Edit key to open the editing screen.

  • Page 93: Selecting The Pattern To Edit

    Edit Size Cancel B: 140x200mm Designs Hoop Size A(F): 126 110mm Edit Size Cancel B: 140x200mm Selecting the pattern to edit The Patterns from the built-in designs, monograms, PC cards and Memory Cards can be edited. Edit To select the pattern to edit, press the pattern selection key of the desired pattern on the editing screen.

  • Page 94: Moving A Pattern

    Edit Size Cancel B: 140x200mm Edit Size Cancel B: 140x200mm A(F): 126x110mm A(F) Cancel Edit Size Cancel A(F): 126x110mm Moving a pattern To move the embroidery pattern on the editing screen, press and drag the pattern to a desired location with your fingertip.

  • Page 95: Resizing A Pattern

    Edit Size Edit Size A(F): 126x110mm Edit Size A(F): 126x110mm Resizing a pattern When you press the size key, the size adjusting window will appear. Size 100% You can change the size of embroidery patterns from 90% to 120% of the original pattern size. The size will change 10% each time you press the plus or minus Cancel key.

  • Page 96: Saving A File

    Edit You can select the location to where you want to save the file. Press the the internal memory of the sewing machine or an ATA PC card. 2 Built-in/Card Key The file name will be automatically assigned starting from M_001 in order.

  • Page 97: Assigning A File Name

    Cancel Short of memory space, the file cannot be saved. The same file name exists, overwrite it? Cancel Assigning the a name You can assign a file name in the file name window. Press the File Name File Name window. The character keys are displayed in the window.

  • Page 98: Combining A Built-In Design And Monogram

    Designs Hoop Size A(F): 126 110mm Ready to Sew 9 min 6 colors Size 46x42mm A(F): 126x110mm Tangerine Toast Brown Blond Edit Size Cancel A(F): 126x110mm Gothic A(F) Font Gothic A(F) Font Combining a built-in design and monogram Example: To combine built-in design 41 and the word “Bear”...
  • Page 99 Gothic A(F) Font Edit Size Edit Cancel A(F): 126x110mm Ready to Sew 12 min 6 colors Size 55x62mm A(F): 126x110mm Tangerine Toast Brown Blond Select “e”, “a” and “r”. Press the OK key. The word “Bear” will appear in the editing window. Edit Move the word under the pattern by dragging it or with the layout keys.

  • Page 100: Opening A Saved File

    Designs Hoop Size A(F): 126 110mm Open File(Built-in) Built-in M_002 M_001 M_002 Cancel Are you sure you want to delete this file? Opening a Saved File You can open a file to sew embroidery patterns that you have saved. When you press the open file key, the open file window will appear.

  • Page 101: On-Screen Help

    Designs Hoop Size A(F): 126 110mm Index Adjusting Patterns Changing needles Inserting the bobbin Sensor Buttonholes Threading the Machine Winding the bobbin Changing needles On-screen Help You can view on-screen help for the basic operations of the machine. Press the Help key. The help index window will appear.

  • Page 102: Care And Maintenance

    CARE AND MAINTENANCE WARNING: Turn the power switch off and unplug the machine before cleaning. NOTE: Do not dismantle the machine in any way other than what is explained on this page. Cleaning the Hook Race and Feed Dog Remove the Hook Cover Plate by sliding the hook cover plate release button to the right.

  • Page 103: Replacing The Light Bulb

    Replacing the Light Bulb WARNING: Turn the power off before replacing the light bulb. The bulb could be HOT, wait until it has cooled down before touching it. To remove: Remove the cap and setscrew. Remove the faceplate. 1 Cap 2 Setscrew 3 Faceplate Pull out the bulb from the socket.

  • Page 104: Troubleshooting

    Troubleshooting Problem The machine is noisy. 1. Threads have been caught in the hook mechanism. 2. The feed dog is packed with lint. The needle thread 1. The needle thread is not threaded properly. breaks. 2. The needle thread tension is too tight. 3.
  • Page 105 Problem Slipping fabric 1. The presser foot pressure is not adjusted correctly 2. The correct presser foot is not being used. 1. The feed dog is packed with lint. The cloth is not feeding smoothly. 2. The presser foot pressure is too weak. 3.

  • Page 106: Stitch Chart

    STITCH CHART 01 02 03 04 08 09 10 11 12 17 18 19 14 15 16 Sensor Auto 27 28 36 37 40 41 42 53 54 55 56 57 58 59 60 61 62 63 64 66 67 69 70 71 72 73 76 77...

  • Page 107: Design Chart

    DESIGN CHART Pattern 81 is a center lines for calibration of the Cloth Setter.
  • Page 108 DESIGN CHART Gothic Script Cheltenham 3-letters / 2-letters...

Table of Contents