Connecting The Machine To The Power Supply; Controlling Sewing Speed; For Your Safety - Janome 8002DG Instruction Book

3
2
1
1
6
1
3
1

Connecting the Machine to the Power Supply

5
Before connecting the machine to the power supply,
make sure the voltage and frequency shown on the
4
machine conform to your electrical power.
1. Turn off the power switch, and connect the
2
machine plug to the machine socket.
2. Connect the power supply plug to your power
supply.
3. Turn on the power switch.
1
2
3
4
5
6

Controlling Sewing Speed

Sewing speed can be varied by the speed controller.
The harder you press on the controller, the faster the
machine runs.
Step on the speed controller with the presser foot
lifter up, and practice controlling the speed.
1

For Your Safety:

* While in operation, always keep your eye on the
sewing area, and do not touch any moving parts
such as the thread take-up lever, loopers,
handwheel, needle or knives.
* Always disconnect the machine from the power
supply:
— when leaving the machine unattended.
— when attaching or removing parts.
— when threading or cleaning the machine.
* Do not place anything on the foot control,
otherwise the machine will start inadvertently.
Power switch
Machine plug
Machine socket
Power supply plug
Power supply
Speed controller
Speed controller
5