Table of Contents
Advertisement
C
As necessary, type the names to distinguish the printer in [IPP Port Name]. Type a different
name from those of any existing port name.
If you omit this, the address typed in [Printer URL] will be set as the IPP port name.
D
If a proxy server and IPP user name are used, click [Detailed Settings], and then configure
the necessary settings.
Note
For more information about these settings, see SmartNetMonitor for Client Help.
E
Click [OK].
Standard TCP/IP Port
A Click [Add].
B Select [Standard TCP/IP], and then click [OK].
C Click [Next] in the "Add Standard TCP/IP Printer Port Wizard" window.
D Type the printer name or IP address in the "Printer Name or IP Address" box.
E Click [Finish] in the "Add Standard TCP/IP Printer Port Wizard" window.
LPR Port
A Click [Add].
B Select [LPR Port], and then click [OK].
C Type the printer's IP address in the "Name or address of server providing lpd" box.
D Type "lp" in the "Name of printer or print queue on that server" box, and then click [OK].
J J J J
Make sure the location for the selected printer is shown after [Port:].
Operating Instructions
Client Reference
96
Advertisement
Table of Contents
