Lanier LP 036c Operating Instructions Manual page 37

B Click the printer you want to use, and then click [OK].
Note
Printers that respond to an IP broadcast from the computer will be displayed. To print to a
printer not listed here, click [Specify Address], and then type the IP address or host name.
You cannot add an address partially similar to that already used. For example, when
"192.168.0.2" is already used, "192.168.0.2xx" cannot be used. Similarly, when
"192.168.0.20" is already used, "192.168.0.2" cannot be used.
NetBEUI
A Click [NetBEUI], and then click [Search].
A list of printers that can be used by the NetBEUI protocol appears.
B Click the printer you want to use, and then click [OK].
Note
Printers that respond to a broadcast from the computer will be displayed. To print to a printer
not listed here, click [Specify Address], and then type the NetBEUI address. Confirm the Net-
BEUI address on the network is on the configuration page. For more information about print-
ing the configuration page, see "Printing a Configuration Page" in the Administrator
Reference. NetBEUI address appears as "\\RNPxxxx\xxx" on the configuration page. Type
the printer's network path name in the form of "%%Computer name\Share name". Do not type
"\\" as head characters but "%%".
You cannot print to printers beyond routers.
Operating Instructions Client Reference
36