Printing Without Using A Print Server; Configuring The Protocols - Lanier LP 036c Operating Instructions Manual

Printing without Using a Print Server

Preparation
To use a printer connected to the Ethernet interface or IEEE 802.11b (Wireless LAN) interface, se-
lect "SmartNetMonitor", "Standard TCP/IP Port", "LPR Port" when installing the printer driver.
• SmartNetMonitor See
"Installing the PCL 5c or RPCS Printer Driver"
• Standard TCP/IP Port, LPR Port See
PCL 5c or RPCS Printer Driver"
Note
If you want to use "LPR Port", "Print Services for UNIX" must be installed.

Configuring the Protocols

Configuring TCP/IP and IPP for Printing
Follow these instructions to configure the printer and Windows 2000 to use the TCP/IP protocol and
IPP.
Configuring the printer
Configure the printer to use the TCP/IP protocol.
• Confirm that the TCP/IP protocol is set to be active. (The factory default is active.)
• Assign an IP address and make other settings required for using the TCP/IP protocol.
Operating Instructions
p.56 "Configuring the Protocols"
p.56 "Configuring the Protocols"
or p.65 "Installing the PostScript Printer
and p.59 "Installing Software"
or p.65 "Installing the PostScript Printer
Client Reference
and p.60
Driver".
and p.60 "Installing the
Driver".
56