Printing Without Using A Print Server; Configuring The Protocols - Lanier LP 036c Operating Instructions Manual

Lanier printer instructions manual
Table of Contents

Advertisement

Printing without Using a Print Server

Preparation
To use a printer connected to the Ethernet interface, select "SmartNetMonitor" or "LPR Port" when
installing the printer driver.
SmartNetMonitor
See
p.122 "Configuring the Protocols"
PCL 5c or RPCS Printer Driver"
LPR Port
See
p.122 "Configuring the Protocols"
or
p.132 "Installing the PostScript Printer
Note
If you want to use "LPR Port", "Microsoft TCP/ IP Printing" must be installed.

Configuring the Protocols

Configuring TCP/IP and IPP for Printing
Follow these instructions to configure the printer and Windows NT 4.0 to use the TCP/IP protocol and
IPP.
Configuring the printer
Configure the printer to use the TCP/IP protocol.
• Confirm that the TCP/IP protocol is set to be active. (The factory default is active.)
• Assign an IP address and make other settings required for using the TCP/IP protocol.
Operating Instructions
and
p.126 "Installing Software"
or
p.132 "Installing the PostScript Printer
and
p.127 "Installing the PCL 5c or RPCS Printer Driver"
Driver".
Client Reference
and
p.127 "Installing the
Driver".
122

Advertisement

Table of Contents
loading

Table of Contents