Table of Contents
Advertisement
B
Change the Lana Number. Click the [Services] tab, click "NetBIOS Interface" in the [Network
Services:] box, and click [Properties].
C
Click the Lana Number corresponding to the Nbf protocol of the [Network Route] headline, and
click [Edit].
D
Type "0" as the Lana Number.
Note
If another protocol's Lana Number is configured at "0", change it to another number other than
"0".
E
Click [OK].
F
Click [Close], and close the [Network] dialog box.
G
After confirming the message to restart, click [Yes].
Note
After you change the Lana Number, you must restart the computer.
Operating Instructions
Client Reference
125
Advertisement
Table of Contents
