Lanier LD235 Copy Reference Manual page 91

❖ Edit
Problem
In Double Copies mode,
parts of the original image
are not copied.
In Border, Centre, or Cen-
tre/Border mode, parts of
the original image are not
copied.
In Margin Adjustment
mode, parts of the original
image are not copied.
In Image Repeat mode, the
original image is not cop-
ied repeatedly.
❖ Stamp
Problem
The stamp position is
wrong.
Causes
Combination of original
and copy paper is not cor-
rect.
You set a wide erased mar-
gin.
Originals are not scanned
correctly.
You set a wide erased mar-
gin.
There is a lack of margin
space on the opposite side
of the binding position.
You selected copy paper
the same size as the origi-
nals, or you did not select
the proper reproduction
ratio.
Causes
The paper orientation is
wrong.
If You Cannot Make Copies As You Want
Solutions
Select A3L for A4 K originals and
A4 for A5 originals.
Make the margin width narrower.
You can adjust it between 2–99 mm
(0.1"–3.9"). See p.97 "Erase Border
Width"and p.97 "Erase Centre
Width".
Place the originals correctly.
Set a narrower margin with User
Tools. You can set the width be-
tween 0–30 mm (0"–1.2"). See p.97
"Front Margin: Left/Right", p.97
"Front Margin: Top/Bottom", p.97
"Back Margin: Left/Right", and
p.97 "Back Margin: Top/Bottom".
Select copy paper larger than the
originals.
Select the proper reproduction ratio.
Solutions
Check the paper orientation and
stamp position.
3
81