Lanier LD235 Copy Reference Manual page 78

Copying
Note
❒ You can specify the stamp posi-
tion, pages to be stamped, and
numbering. See p.68 "Changing
the stamp position" and p.68
"Specifying the first printing
page and start number".
2
E
After you specify all desired set-
tings, press [OK].
F
Press [OK].
G
Place the originals, and then press
the {Start} key.
Changing the stamp position
A
Press [Change].
B
Select the desired position, and
then press [OK].
Specifying the first printing page and
start number
If you selected (P1, P2..., -1-,-2-...,
P.1, P.2..., 1, 2..., )
Note
❒ Below explains the example when
(P1, P2...) is selected. The steps are
the same for other cases.
A
Press [Change] on the right side.
68
B
Press [First Printing Page], enter the
o r i g i n a l s h e e t n u m b e r f r o m
which to start printing, and then
press the {#} key.
Note
❒ To change the number entered,
press [Clear] or the {Clear/Stop}
key, and then enter a new
number.
C
Press [Numbering from / to], enter
the number of the page from
which to start numbering with
the number keys, and then press
the {#} key.
Note
❒ The example below shows when
the first printing page is "2"and
the start number is "3".
GCANPE2J